16-
give an automatic, sound activated, synchronized light show. This function is good when you
want an instant show. You have to set the first unit in master mode
and select
(auto show),
(show 1) or …or
(show 12). Its DMX input jack will
have nothing plugged into it, and Its master LED will be constantly on and sound LED will
flash to the music. The other units will have to select
(normal) or
(2 light
show) mode, Their DMX cables plugged into the DMX input jacks (daisy chain) and the
slave led lights will constantly on.
2-light show
In slave mode,
means the unit works as the master unit and
means 2-light
show. In order to create a great light show, you can set
on the second unit to get
contrast movement to each other, even if you have two units only.
4.2. Easy Controller (by CA-8)
The easy remote control is used only in master/slave mode. There is a terminator
for connect the easy controller inside the fixture. By connecting the cable into
DMX IN waterproof cable entry gland to the CA-8 terminator of the first fixture,
you will find that the remote control on the first fixture will control all the other
fixtures for Stand by, Function and Mode functions.
4.3 DMX Controller
Using universal DMX controller to control the units, you have to set DMX address from 1 to
512 channel so that the units can receive DMX signal.
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the DMX512 address.
Once the address has been selected, press and keep
ENTER
button pressed up to when
the display stops blinking or storing automatically 8 seconds later. To go back to the
functions without any change press the
MENU
button again.
If you use please refer to the following diagram to address your DMX512 channel for the first
4 /2 units.
Blackout Blackout the unit
Function
1. White Strobe
2. Color Strobe
3. Sound White Strobe
4. Sound Color Strobe
Select Show
(Show 1-12)
Select Color
(Color 1-15)
Select Speed
4. Fast
5. Middle
6. Slow
Mode
Sound/Strobe
(LED OFF)
Show
(LED ON)
LED slow blinking LED fast blinking
