LED BAR 161 RGBW
USER MANUAL
1.
CAUTION
Keep this device away from rain and moisture! Unplug mains lead before opening the housing! Every person involved with
the installation, operation and maintenance of this device :
- Has to be qualified
- Follow the instructions of this manual
2.
SAFETY INSTRUCTIONS
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his
service agent or a similar qualified person in order to avoid a hazard
CAUTION :
Be careful with your operations. With a dangerous voltage you can suffer a dangerous when touching the
wires!
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user
manual.
Important
- Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability
for any resulting defects or problems.
- Keep away from heaters and other heating sources!
- If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation water might damage your device. Leave the device switched off until it has
reached room temperature.
- Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that
their effectiveness is impaired, for example by cracks or deep scratches.
- Always disconnect from the mains, when the device is not in user or before cleaning it.
- Please note that damages caused by manual modifications on the device or unauthorized operation by unqualified
persons are not subject to warranty.
- Keep away children and amateurs from the device!
3. OPERATION INSTRUCTIONS
The system has DMX online mode and stand-alone mode. DMX online mode can link up each other and is controlled by
DMX controller. Stand-alone has some functions, such as dimmer, change program, music active and so on.
When under DMX mode or Master/slave mode, the signal is present. The slave LED will blink fast. The address will blink
without signal.
