Nicols LED BAR 1241 RGBW, Руководство пользователя

Страница: 10 / 17

18-
TABLE OF CONTENTS
1. Safety Instruction
2. Technical Specification
3. How To Set The Unit
3.1 Control Panel
3.2 Main Function
4. How To Control The Unit
4.1 Master/slave built-in preprogram function
4.2 Easy controller
4.3 Universal DMX controller
4.4 DMX 512 Configuration
4.5 DMX512 Connection
5. Troubleshooting
6. Fixture Cleaning
19-
1. Safety Instruction
WARNING
Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before using the unit.
Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.
It’s important to ground the yellow/green conductor to earth in order to avoid electric
shock.
The unit is for indoor use only. Use only in a dry location.
The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces. Be sure that no ventilation slots are blocked.
Disconnect main power before replacement or servicing.
Make sure there is no flammable materials close to the unit while operating as it is fire
hazard.
Use safety cable when fixes this unit.
Maximum ambient temperature is TA: 40
℃
. Don’t operate it where the temperature is
higher than this.
In the event of serious operating problem, stop using the unit immediately. Never try to
repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance center. Always
use the same type spare parts.
Do not touch any wire during operation as high voltage might be causing electric shock.
You should never look at the beam light directly in order not to risk any visuals disorders.
Warning
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.
Do not open the unit within five minutes after switching off.
Please read carefully the instruction, which includes important
information about the installation, usage and maintenance.
For power supply, do not connect in series much more than 6 units, use
another mains supply for next 6 units.