Nicols Blue Laser Скачать руководство пользователя страница 6

Страница: 6 / 8

FUNCTION SETTINGS

Use DIP switches to assign a

unit’s function : DMX, Master / Slave, sound active or auto mode. For the unit is DMX mode, set the DMX

address using dipswitch. Each dipswitch represents a binary value. Please refer to the chart below.

Dipswitch #10 is used to set master or slave mode. Master modes have sound active and AUTO mode. Slave modes have DMX and

Slave mode. The units automatically identify DMX or SLAVE mode by data received. Dipswitch #9 is used to set sound active or AUTO

mode in master mode.

DMX ADDRESS CALCULATION

In DMX mode, the DIP switch from # 1 to # 9 should be set to record a DMX address. The address ranges from 1-511. Each dipswitch

represents a binary value. Please refer to table below.

Dipswitch

VALUE

Dipswitch

VALUE

＃

128

＃

256

＃

DMX, on "0"

Each unit has 7 channels. So each product may be receiving a 7-channel DMX address at least. If you assign an address on 8 channels,

the DMX address is

: 8*N +1, N=0, 1, 2, 3….

Example: Address 1 loop =1

Address 2 loop = 9

Address 3 loop = 17

Address 4 loop = 25

Please refer to the chart on the last page to set the DIP switch according to the DMX address assignment.

5. OPERATION

a. STAND ALONE OPERATION : Sound activation and AUTO

This mode allows a single device to react to the sound of music.

1. Place the device in a suitable and stable position.

2. Set the dipswitch to select AUTO or Sound active mode.

3. Turn on the unit. The unit resets then it begins to work.

4. The unit will react to low frequencies through the internal microphone. Adjust the sound sensitivity with the appropriate knob

located at the rear of the unit. The LED indicates whether the music mode is activated.

b. MODE MASTER / SLAVE

This mode allows you to connect up to 32 units together without controller.

Install the unit in a suitable and stable position.

LOOP

ADDRESS

CODE

DIPSWITCH

100000000

100100000

#1+#4

100010000

#1+#5

100110000

#1+#4+#5

Содержание Blue Laser









Результаты поиска

Содержание Blue Laser

Отзывы:

Бренды по названию

Популярные бренды

Nicols Blue Laser, Руководство пользователя

Результаты поиска

Содержание Blue Laser

Отзывы:

Бренды по названию

Популярные бренды