26-
3.3 Home Position Adjust
In the main functions, hold
Enter
button for at least 3 seconds into offset mode, when the
is shown on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to adjust the home position. Once the position has been selected,
press the
ENTER
button to setup, hold the
MENU
button for about 3 seconds or wait for 8
seconds to back to the main functions without any change.
4. How To Control The Unit
You can operate the unit in three ways:
1. By master/slave built-in preprogram function
2. By easy controller
3. By universal DMX controller
No need to turn the unit off when you change the DMX address, as new DMX address
setting will be affected at once. Every time you turn the unit on, it will show
on
the display and move all the motors to their ‘home’ position and you may hear some noises
for about 20 seconds. After that the unit will be ready to receive DMX signal or run the built
in programs.
4.1 Master/Slave Built In Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to
give an automatic, sound activated, synchronized light show. This function is good when
you want an instant show. You have to set the first unit in master mode
and select
(show 1) or
(show 2) or
(show 3) or
(show 4) mode. Its
DMX input jack will have nothing plugged into it, and Its master LED will be constantly on
and sound LED will flash to the music. The other units will have to set in slave mode
and select
(normal) or
(2 light show) mode, Their DMX cables
plugged into the DMX input jacks (daisy chain) and the slave led lights will constantly on.
2-light show
In
(slave mode),
means the unit works normally and
means
2-light show. In order to create a great light show, you can set
on the second unit
to get contrast movement to each other, even if you have two units only.
Содержание BIRDY 25 MB
Страница 13: ...13 5 Configuration DMX512 ...
Страница 28: ...28 5 DMX 512 Configuration 6 DMX512 Connection ...
