Sunlite Touch-sensitive Intelligent Control Keypad
Ref. STICK-DE3
Page 3/4
Technical datasheet
Revision date 28 August 2012
www.nicolaudie.com
Version 1.0
2x10 pins EXTENSION connector
DMX CHIPS
can be
replaced here
DMX
universe #1
DMX
universe #2
Ref: SP485ECN-L
MAX485 CSA
© Nicolaudie-Sunlite 1989-2012. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
RS232 triggering
Make a cable using the 3 pins : TX, RX and G (GND)
Set the RS232 parameters to : 9600bds 8 bits, no Parity, 2 Stop bits
- To play a scene, send 3 bytes :
1 x 255
(x = scene number)
- To stop a scene, send 3 bytes :
2 x 255
(x = scene number)
- To pause a scene, send 3 bytes :
3 x 255
(x = scene number)
- To release a pause, send 3 bytes :
4 x 255
(x = scene number)
- To reset a scene, send 3 bytes :
5 x 255
(x = scene number)
Note: the scene number (x) can be from 1 to 40. For instance, 11 means Page B Scene #3
Example of relay : FINDER
Ref. 22.23.9.012.4000
http://www.findernet.com/fr/products/
profiles.php?serie=22&lang=en
BLACKOUT relay
(energy saving)
using the 2 pins : BK
and G (GND)
PORTS triggering
It is possible to start scenes using the input ports (contact closure). To activate a port, a brief
contact must be established between the ports (1...8) and the ground (GND). This is a contact
closure so there is no need to hold the connection, it acts like a basic switch.
P1 P2 P3 P4 ... GND
