Nico Engel Nic-O-Tilt, Руководство по эксплуатации

Страница: 6 / 9

Update: 29.09.2018 Technical changes reserved.
www.nicoengel.de
6 from 9
shop@nicoengel.de
4. loosen, but do not unscrew completely, all fastening elements of the motor unit;
-
Four cheese head screws DIN 912 - M2.5x6 ( Fig. 3)
- two grub screws DIN 916 - M4x4 ( Fig. 3)
Fig. 3
5. Press the motor by hand towards the turntable and cover and tighten the two upper cap screws lightly
(hand-tight) with continued pressure on the motor.
6. Tip: Place the Nic-O-Tilt on a suitable surface as shown and press it with one hand on the motor (Fig. 4).
Fig. 4