FITTING ACCESSORIES FOR NE4 SERIES
GRP Gable Lids
Position the lid over the bath and lower into place.
The lids are designed to fit snugly so that condensate runs into the bath.
Stainless Steel Gable Lids
Position the lid over the bath and lower into place.
These lids have bo drip points, provide full working height across the bath when fitted and have a
ventilation gap.
Stainless Steel Flat Lids
Position the lid over the bath and lower into place.
Stainless Steel Raised Shelves
The raised shelf provides a reduced liquid depth for shallow vessels in NE4 series water baths. With
recommended minimum water level in NE4 range of 70mm with this in place it will provide a working
depth of 5mm or 35mm.
Stainless Steel Test Tube Racks
Place the loaded test tube rack into the bath on top of either the stainless steel perforated shelf or the
raised shelf.
Thermometer Clip
This can be positioned anywhere on the perimeter of the bath by cliping over the edge. The thermom-
eter then lies flush with the top edge of the bath to prevent accidental damage.
Draining Syphon
Allows the easy and quick emptying of any water bath. Water temperature must be below 45°C before
emptying can commence.
Mounting Bracket
This Mounting Bracket is designed to fit the NE4 series Clifton Thermostirrers for mounting on any
number of vessels or tanks.
Maximum tank thickness for the Bracket = 30mm.Thumb wheel adjuster secures the Bracket and
Thermostirrer to tank.
Polypropylene Spheres
Place on top of the water/oil to provide a floating lid reducing evaporation and insulating the bath
reducing heat losses.
The Clifton Range - 3 Year Warranty
12
High Quality Products at Affordable Prices
