NiceRF SA818 Скачать руководство пользователя страница 2

DOWN. Press key SET to set the next order. 
 
Set bandwidth 
          Press  key  DOWN,  the  LED  close  to  “BW”  is  on,  indicates  that  LED  nixie  tube  is  displaying 
bandwidth, pressing key SET to setting mode and press key DOWN to change bandwidth. 
 
Set RX subaudio. 
          Press key DOWN, the two LEDS close to “RXF” and “CTCS” are light up, it indicates that LED nixie 
tube is displaying  receiving  subaudio.  Press  key  SET to  change receiving subaudio.  If the  LED  nixie  tube 
display “00”, it means that no subaudio in receiving mode. If display “tcs”, it means that receiving subaudio 
is analog, and if display “cds”, it means that receiving subaudio is digital. 
 
Set volume 
          Press key DOWN, the LED close to “VOL” is on, press key SET to setting mode, and can be changed 
by key UP or DOWN. 
 
Set SQ 
          Press key DOWN, the LED close to “SQ” is on, press key SET to setting mode, and can be changed 
by key UP or DOWN. 
 
Set TX subaudio. 
          Press key DOWN, the two LEDS close “TXF” and “CTCS” are on, indicates that LED nixie tube is 
displaying sending subaudio. Press key SET to change sending subaudio. If the LED nixie tube display “00”, 
it means that no subaudio in sending mode. If display “tcs”, it means that sending subaudio is analog, and if 
display “cds”, it means that sending subaudio is digital. 
 
Set RX frequency 
            Press  key  DOWN,  the  LED  close  to  “RXF”  is  on,  indicates  that  LED  nixie  tube  is  displaying  RX 
frequency. Press key SET, the highest order of frequency will flickering, and can be changed by key UP or 
DOWN.   
 
Press key SET to set the next order. 
            Press key UP, it will start to scan frequency and subaudio, the frequency displayed on the LED nixie 
tube will increase quickly and check the module whether receive the frequency and the subaudio, it will stop 
when there is any signal or press key DOWN. 
 

Отзывы: