NiceRF G-NiceRF RF125 Скачать руководство пользователя страница 3

www.nicerf.com

RF125

NiceRF Wireless Technology Co., Ltd.

Rev 1.1

- 3 -

[email protected]

1. Overview

The RF125-TX module, combined with our RF125-RX module, 125K wireless air wake-up and data
transmission, can be applied to PKE keyless access control, campus access control, etc.
For RF125-TX, the transmitter ID, transmission data content, and transmission time interval can be set
through the serial port.
RF125-RX, the receiver has low power consumption and wireless wake-up, can wake itself up in the
air and wake up the connected device at the same time, the receiver serial port outputs the received
wireless data. It can work in pairing mode or broadcast mode. The communication distance is 5-8
meters, far exceeding the same type of products.
RF125-RA is a full-featured wireless wake-up module that integrates RF125-RX, 125KHz antenna,
pairing button, and coin cell for battery. Just insert the battery and start to use.

2. Features

Transmitter RF125-TX wide voltage

input: 6-30V

Transmitter RF125-TX2 voltage input: 9-12V

Transmitter operating temperature range: -40
~85

The transmitter can send default data or customize
data content

Transmitter ID can be modified

The transmission time interval can be modified

Transmitter built-in overvoltage protection

Transmitter built-in overcurrent protection

Transmitter built-in reverse connection protection

Receiver wakes up connected device

The receiver supports pairing mode and broadcast
mode

Receiver ultra-low power consumption

Small receiver size

Long communication distance (far beyond
products of the same type)

High receiving performance

Receiver working voltage: 2.5~3.6V

Receiver operating temperature range: -40

~85

Receiver carrier frequency range: 15-150KHz

Low-power three-channel low-power ASK
receiver

Receive and wake up sensitivity: 80uVRMS

The lowest power consumption in the listening
state of the receiver in low power consumption
mode: <9uA

Receiver 1/2/3 channel independent operation

Programmable sensitivity adjustment range

False trigger counter

Support RTC wake-up timing

Содержание G-NiceRF RF125















Отзывы: