11
CHARGING
We recommend fully charging the speaker before its first use to maximize the battery’s
lifespan. The speaker takes approximately 3 hours to fully charge. Low battery is
announced by an audible signal. To charge the speaker’s battery connect the enclosed
USB-C cable to the charging port (10) and connect to any charging adapter (voltage 5V
and output current minimum of 1A) or to a USB port on your PC. The charging process is
signalized by the charging LED diode (3), the diode will stop shining once the speaker has
finished charging.
POWERING ON/OFF
Press and hold button (2) for 3 seconds to power on/off the speaker.
CONNECTING TO BLUETOOTH
1. Press the power on/off button (2) for 3 seconds to power on the speaker. The spea-
ker is now in pairing mode ready for Bluetooth connection. Pairing mode is signalized
by an LED diode flashing blue (3).
2. Activate Bluetooth on your own device. Select “Niceboy RAZE 3 guru” from the list of
available devices.
3. Your device will connect to the speaker. Successful pairing is announced by an audio
signal and the flashing of the LED diode (3).
PLAYBACK
Play or pause tracks by pressing button (5). Press and hold the volume controls, located
on buttons (4) and (6) to change volume. Press the volume up button to jump to the next
track and the volume down button to jump to the previously played track.
AUX MODE
1. Insert the enclosed 3.5 mm jack cable into the audio port (8) and the speaker will
automatically switch to the relevant mode.
2. Use the device with which you are connected to the speaker to control music play-
back.Press and hold the volume controls, located on buttons (4) and (6) to change
the volume.