Niceboy HIVE bones, Инструкция по эксплуатации

Страница: 12 / 38

12
BASIC CONTROLS
Press the (4) button for 3 seconds and the headphones power on/power off. Press the same
button for 5 seconds and the headphones will power on and activate the pairing mode, in
which you can connect the headphone‘s Bluetooth to your device.
Quickly press buttons (3) and (4) for less than 3 seconds to lower/raise the volume. Quickly
press the multi-functional button (2) to play/pause playback. Quickly press the button
twice to skip to the next song.
To return to factory settings, simultaneously press and hold the multi-functional button (2)
and the lower volume button (3).
TELEPHONE CALLS
You accept/end incoming calls by quickly pressing the multi-functional button (2). Long
press during a call to switch to the handset. Long press the multi-functional button (2) for 3
seconds during an incoming call to reject the call.
CHARGING
We recommend fully charging the headphones before their first use to maximize the
battery life. Fully charging the headphones takes approximately 2 hours.
Low battery is indicated by an audio prompt signal and the LED indicator (6) slowly flashing
red. Charge the headphones by connecting the enclosed micro USB cable to the charging
port of the headphones (5) as well as to any charging adapter (voltage 5V and minimum
1A output current) or to the USB port of a PC. The progress of the power supply is indicated
by the LED indicator (6) shining red. The indicator will start to shine blue after the device is
fully charged.
EN