Nibe S1155PC, Руководство по установке, Страница: 44 / 80

Menu 4 - My system
OVERVIEW
4.1 - Operating mode
4.2.2 - Solar electricity
1
4.2 - Plus functions
4.2.3 - SG Ready
4.2.5 - Smart Price Adaption™
4.3 - Profiles 1
4.4 - Weather control
4.5 - Away mode
4.6 - Smart Energy Source™
4.7.1 - Variable electricity price 4.7 - Energy price
4.8 - Time and date
4.9 - Language
4.10 - Country
4.11.1 - Installer details 4.11 - Tools
4.11.2 - Sound when pressing button
4.11.4 - Home screen
4.30.4 - Fact. settings user 4.30 - Advanced
1 Consult the accessory’s Installer Manual.
MENU 4.1 - OPERATING MODE
Operating mode
Alternative: Auto, Manual, Add. heat only
Manual
Options: Compressor, Additional heat, Heating, Cooling
Add. heat only
Alternative: Heating
The operating mode for S1155PC is normally set to "Auto".
It is also possible to select operating mode "Add. heat only".
Select "Manual" to choose which functions are to be activ-
ated.
If "Manual" or "Add. heat only" is selected, selectable options
are shown further down. Tick the functions you want to ac-
tivate.
Operating mode "Auto"
In this operating mode, S1155PC automatically selects which
functions are permitted.
Operating mode "Manual"
In this operating mode you can select what functions are
permitted.
"Compressor" is the unit that produces heating and hot
water for the home. You cannot deselect "compressor" in
manual mode.
"Additional heat" is the unit that helps the compressor to
heat the home and/or the hot water when it cannot manage
the entire requirement alone.
"Heating" means you obtain heating in the home. You can
deselect the function when you do not wish to have the
heating on.
"Cooling" means that you obtain cooling in the home in hot
weather. You can deselect this function when you do not
wish to have cooling in operation.
Caution
If you deselect "addition" it may mean that insuffi-
cient hot water and/or heating in the accommod-
ation is achieved.
Operating mode "Add. heat only"
In this operating mode the compressor is not active, only
additional heat is used.
Caution
If you choose mode "Add. heat only" the com-
pressor is deselected and there is a higher operat-
ing cost.
MENU 4.2 - PLUS FUNCTIONS
Settings for any additional functions installed in S1155PC
can be made in the sub menus.
MENU 4.2.3 - SG READY
Here, you set which part of your climate system (e.g. room
temperature) will be affected on activation of "SG Ready".
The function can only be used in mains networks that sup-
port the "SG Ready" standard.
Affect room temperature
With low price mode on "SG Ready" the parallel offset for
the indoor temperature is increased by "+1". If a room sensor
is installed and activated, the desired room temperature is
instead increased by 1 °C.
NIBE S1155PC Chapter 9 | Control - Menus 44