CONTENTS
Heat conducting
paste
2 x
Cable tie
4 x
LEK
Shunt valve
1 x
LEK
Aluminium tape
2 x
LEK
AXC module
1 x
LEK
Insulation tape
1 x
Temperature
sensor panel
1 x
Temperature
sensors
2 x
COMPONENT LOCATION, AXC MODULE
(AA25)
AA5-X4
AA5-S2
AA5-X2
AA5
AA25-X1
AA5-X9
AA25-FC1
ELECTRICAL COMPONENTS
Accessory card
AA5
DIP switch
AA5-S2
Terminal block, inputs
AA5-X2
Terminal block, communication
AA5-X4
Terminal block, outputs
AA5-X9
Miniature circuit-breaker
AA25-FC1
Terminal block, power supply
AA25-X1
Designations according to standard EN 81346-2.
MOUNTING
Caution
The screw type must be adapted to the surface
on which installation is taking place.
UN
Use all mounting points and install the module upright,
flat against the wall, with no part of the module protrud-
ing beyond the wall.
Leave at least 100 mm of free space around the module
to allow access and make cable routing easier during
installation and servicing.
11
PVT 40 | GB