Nibe EMK 310, Руководство по установке, Страница: 12 / 32

Activating EMK 310
Activation of EMK 310 occurs the firs t time that a flow
is measured. Energy measurement is displayed in the
service information for your main unit.
For main products
wit h softwa re version 6869 or later,
check that the correct flow sensor is selected by going
to the menu 5.3.20 - "flow sensor".
Select EMK300/310 if it is not preset.
When EMK 310 is activated, it is
show n in menu 3.1 -
"service info" and the menu wit h the registered values
becomes available.
service info 3.1
confi g EB15
inc. power
int. add
heat med. pump
charge pump
display type
flow sensor
0
3x400 V
12 kW
Wilo Yonos Para 7.0
Wilo Yonos Para 7.0
EMK300/310
flow sensor
service info 3.1
climate system 1
heat meter
heating, compr. only.
hotwate r, compr. only.
pool, compr. only.
cooling, compr. only.
heating, int. add. incl.
h
w , incl. int. add
BF1
EB15
12.4 l/min
0 kWh
0 kWh
0 kWh
0 kWh
0 kWh
0 kWh
Caution
Also see the Installer manual for VVM 310.
Technical data EMK 310
5,0 – 85 l/min Measurement range
0,1 – 18 kPa Pressure drop
-15 – +85 °C Ambient temperature
<125 °C Medium temperature
5 ±5% VDC Supply
0,1 – 4,75 V Signal
067 246 Part No.
12
GB