
32
33
Fig. 6, 7
Do not place NIBE AG-BU10
on the left side of the indoor
unit!
Indoor unit’s internal
condenser might block
NIBE AG-BU10’s signal.
Turning heat pump ON/OFF
SMS Command
ON
turns heat pump on.
SMS Command
OFF
turns heat pump off.
TIP!
Test before mounting the
controller!
Commands
The range of heat pump temperature values NIBE AG-BU10 controls is 10 - 32 °C
(d20 °C) and the fan speeds are MIN, NORM, MAX (the default is NORM).
After selecting a mode (AUTO, HEAT, COOL, DRY) heat pump is turned on with 20
°C temperature and normal fan speed, if not assigned differently by the Owner or
the Users.
The pump can be assigned different temperature and fan speed values with
NIBE AG-BU10.
For example, the SMS: “COOL 19 MAX” orders the pump to cool until 19 °C and
fan at maximum speed. When you change a heat pump function NIBE AG-BU10
always responds with an SMS that reports its STATUS.
MIN
NORM
MAX
AUTO
AUTO
DRY
COOL
HEAT
10
12
...
28
32
Combine the pump mode, room temperature and fan speed values for a
home atmosphere you like the best.
Testing NIBE AG-BU10
To see if NIBE AG-BU10 can send commands to your heat pump, turn off the
heat pump and press the controller’s TEST button. When the connection is
established, NIBE AG-BU10 turns the heat pump on with its last settings and
you can proceed using the controller.
Содержание AG-BU10
Страница 1: ...1 Manual NIBE AG BU10...
Страница 55: ...108 Art nr 100 001 Rev nr 1504 1...