Nibe AG-AA10 Series, Руководство по установке

Страница: 10 / 24

3. Remove the side panel, then connect the supply
and communication cables to the outdoor unit and
secure them with load relief.
N.O
4. Use insulated copper cooling pipes. Cut a length
of 30 – 50 cm in addition to the distance between
the units.
min. 8 mm min. 8 mm
Insulation
5. Remove burrs from the pipe ends. Turn the pipe
ends downwards to prevent residue entering the
pipe.
6. Thread the flange nuts (which are removed from
the outdoor unit) on the pipes and bend up the
ends of the pipes.
NOTE
Only use tools intended for R410A
AG-AA10 Chapter 5 | Installation 8