INSTALLATION INSTRUCTIONS
NI SCB-264
X
Shielded Connector Block for the NI PXI-2532
This document describes how to install and connect signals to the
National Instruments SCB-264
X
shielded connector block. Use the
NI SCB-264
X
to interface individual signal wires to the rows and columns
of the NI PXI-2532 matrix.
The NI SCB-264
X
has five ribbon cable connectors for connecting to the
NI TB-2640/2641/2642/2643/2644 (NI TB-264
X
)
connector blocks and
screw terminals for connecting signals. The NI SCB-264
X
supports all
NI PXI-2532 topologies that are configured with the NI TB-264
X
. The
NI SCB-264
X
can be used alone, or it can be rack-mounted using the
included DIN rail-mounting kit.
Note
References to the NI TB-264
X
in this document do not include the NI TB-2645. The
NI TB-2645 is not compatible with the NI SCB-264
X
.
Refer to the
NI Switches Getting Started Guide
to determine when to install
the NI SCB-264
X
. Visit
ni.com/switches
for information about other
switching solutions.
̭͈Ρ΅νιϋΠ͉ͅȂུࢊβȜΐ͜܄̞̳ͦ̀͘͘ȃ
