Environmental Standards
This product meets the requirements of the following environmental standards for electrical equipment.
• IEC 60068-2-1 Cold
• IEC 60068-2-2 Dry heat
• IEC 60068-2-78 Damp heat (steady state)
• IEC 60068-2-64 Random operating vibration
• IEC 60068-2-27 Operating shock
Note
To verify marine approval certification for a product, refer to the product label or visit
and search for the certificate.
Design Standards and Compatibility
Rear Transition Interface Design Specifications Version
1.3
RTI compatibility category
Fully Compatible Rear I/O; Digital Input/Output, Analog Input, or Analog
Output up to 8 signal banks
Physical Characteristics
SLSC RTI slots
1
Dimensions
101.9 mm x 30.2 mm x 29.8 mm (4.01 in. x 1.19 in. x 1.17 in.)
Weight
40.4 g (1.4 oz)
Rear connectors
JR1
8-position Molex Ultra-Fit, keyed black (recommended mating connector—
Molex 172258-3108; recommended crimp terminal—Molex 172253-6011;
recommended wire size 16 AWG - 18 AWG (flame rating VW-1 or equivalent);
minimum wire temperature rating 90 °C; minimum wire voltage rating 60
VDC)
JR2 to JR9
10-position Hirose ix Industrial type B receptacle (or equivalent)
Connectors to SLSC module(s)
XP2
110-pin Hard Metric type A
XP3
8-blade Universal Power Module (UPM)
Export Compliance
This product is subject to control under the U.S. Export Administration Regulations (15 CFR Part 730 et. seq.) administered by the U.S. Department of
Commerce's Bureau of Industry and Security (BIS) (
) and other applicable U.S. export control laws and sanctions regulations. This product
may also be subject to additional license requirements of other countries' regulations.
Additionally, this product may also require export licensing before being returned to NI. The issuance of a Return Material Authorization (RMA) by NI does
for more information and to request relevant import classification codes (e.g. HTS), export classification codes (e.g. ECCN), and other
import/export data.
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous
substances from our products is beneficial to the environment and to NI customers.
For additional environmental information, refer to the
Commitment to the Environment
. This page contains the environmental
regulations and directives with which NI complies, as well as other environmental information not included in this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
At the end of the product life cycle, all NI products must be disposed of according to local laws and regulations. For more
information about how to recycle NI products in your region, visit
.
电子信息产品污染控制管理办法（中国
RoHS
）
5
40
e
NI
符合中国电子信息产品中限制使用某些有害物质指令(
RoHS
)。关于
NI
中国
RoHS
合规性信息，请登录
ni.com/
environment/rohs_china
。(
For information about China RoHS compliance, go to
ni.com/environment/rohs_china
.
)
RTI-12309 Safety, Environmental, and Regulatory Information
|
© National Instruments Corporation
|
3
