© National Instruments
|
2-19
Figure 2-4 shows the location of the LabVIEW RT configuration switches. The switches are
shown in the OFF position.
Figure 2-4.
LabVIEW RT Configuration Switches
Drivers and Software
Your hard drive includes a directory called
images
in its root that contains software and soft
copies of manuals for the peripherals. The directory structure under the
images
directory is
logically organized into several levels.
In the
images
directory, you will find a
manuals
directory, an
os
directory, and a
drivers
directory.
The
manuals
directory contains quick reference guides, technical reference manuals, and
National Instruments software manuals, all in Adobe Acrobat format. To access any manual,
change your directory to
c:\images\manuals
and list the contents of that directory.
The
os
directory contains a subdirectory corresponding to the operating system installed on your
computer.
The
drivers
directory contains driver installers for the system peripherals. These files and
directories are copied exactly from the manufacturer distribution disks, so the naming
conventions vary from peripheral to peripheral.
1
Switch 1—Boot LabVIEW RT
2
Switch 2—Boot Safe Mode
3
Switch 3—Disable Startup VI
4
Switch 4—Reset IP Address
3
2
1
4
