2-16
|
ni.com
Chapter 2
Installation and Configuration
Note
If the memory test fails, the controller is not permitted to boot, and the user is
instructed to turn off the controller and replace the memory.
System CMOS
The NI PXIe-8135 contains memory backed up by a battery to store BIOS configuration
information.
Complete the following steps to clear the CMOS contents:
1.
Power off the chassis.
2.
Remove the controller from the chassis.
3.
Press the push-button switch, as shown in Figure 2-3.
4.
Wait ten seconds.
5.
Reinstall the controller in the chassis.
Figure 2-3.
Clearing the CMOS Contents
1
Push-Button Switch SW2
1
NI P
XI
e
-81
3
5
Em
b
e
d
ded Contr
ol
ler
