manualshive.com logo in svg

NI PCI-5122, Руководство по началу работы

Поделиться
Скачать
NI PCI-5122 Скачать руководство пользователя страница 9

Table 2. PXI/PXIe/PCI-5122 Front Panel Indicators

Label

Function

 

 

ACCESS Indicates the status of the PCI bus and the interface from the PXI/PXIe-5122 to

the controller.

ACTIVE Indicates the status of the onboard acquisition hardware of the PXI/PXIe-5122

Figure 5. PXI/PXIe/PCI-5122 9-Pin DIN Connector Pin Assignments

4

3

5

6

7

8

9

1

2

1. +5 V (Fused)
2. GND
3. Reserved
4. Reserved
5. Reserved

6. PFI 1
7. Reserved
8. Reserved
9. PFI 0

Configuring the PXI/PXIe/PCI-5122 in MAX

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX
informs other programs about which devices reside in the system and how they are configured.
MAX is automatically installed with NI-SCOPE.
1.

Launch MAX.

2.

In the configuration tree, expand 

Devices and Interfaces

 to see the list of installed

devices.

Installed devices appear under the name of their associated chassis.

3.

Expand your 

Chassis

 tree item.

MAX lists all devices installed in the chassis. Your default device names may vary.

Note

 

If you do not see your device listed, press <F5> to refresh the list of

installed devices. If the device is still not listed, power off the system, ensure
the device is correctly installed, and restart.

4.

Record the device identifier MAX assigns to the hardware. Use this identifier when
programming the PXI/PXIe/PCI-5122.

5.

Self-test the device by selecting the device in the configuration tree and clicking 

Self-

Test

 in the MAX toolbar.

NI PXI/PXIe/PCI-5122 Getting Started Guide

  | 

© National Instruments

  | 

9

Содержание PCI-5122

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды