Appendix A
Specifications
MXI-Express Gen II x8 Series User Manual
A-4
ni.com
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
•
EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions
•
FCC 47 CFR Part 15B: Class A emissions
•
ICES-001: Class A emissions
Note
In the United States (per FCC 47 CFR), Class A equipment is intended for use in
commercial, light-industrial, and heavy-industrial locations. In Europe, Canada, Australia
and New Zealand (per CISPR 11) Class A equipment is intended for use only in
heavy-industrial locations.
Note
Group 1 equipment (per CISPR 11) is any industrial, scientific, or medical
equipment that does not intentionally generates radio frequency energy for the treatment
of material or inspection/analysis purposes..
Note
For EMC declarations and certifications, and additional information, refer to the
section.
CE Compliance
This product meets the essential requirements of applicable European
Directives as follows:
•
2006/95/EC; Low-Voltage Directive (safety)
•
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Online Product Certification
To obtain product certifications and the Declaration of Conformity (DoC)
for this product, visit
ni.com/certification
, search by model number
or product line, and click the appropriate link in the Certification column.
