Calibrating FieldPoint AI Modules with Calibration Executive
4
ni.com
Software
To calibrate the FieldPoint AI modules with Calibration Executive, you
need to install the FieldPoint calibration procedure for Calibration
Executive and FieldPoint Explorer on your system.
Complete the following steps to install the FieldPoint calibration procedure
for Calibration Executive:
1.
Make sure that your computer and monitor are powered on and
that you have installed Windows NT/Me/98/95.
2.
Close all open applications.
3.
Insert the installation CD into the CD-ROM drive.
4.
Choose the
Run
option from the
Start
menu on the desktop task bar.
5.
In the command line box, enter
x
:\setup.exe
(where
x
is the letter
of the CD-ROM drive you are using), then click
OK
.
6.
Follow the onscreen instructions to complete the installation.
The setup program installs Calibration Executive as well as
the associated files listed in Table 2.
Complete the following steps to install FieldPoint Explorer:
1.
Insert the FieldPoint Explorer CD into the CD-ROM drive on your
computer.
2.
Choose the
Run
option from the
Start
menu on the desktop task bar.
3.
In the command line box, enter
x
:\setup.exe
(where
x
is the letter
of the CD-ROM drive you are using), then click
OK
.
4.
Follow the onscreen instructions to complete the installation.
Table 2.
Calibration Executive Directories and Supporting Files
Directory Name
Contents
Calibration Executive
\Procedures\FP-
XX-XXX
\Limits
Microsoft Access database that
stores the calibration limits for
FieldPoint AI modules (excluding
FP-TC-120)
Calibration Executive\Procedures\FP-
XX-XXX
Directory structure that contains the
calibration procedures
Calibration Executive\
Procedures\FP-
XX-XXX
\Support Files
Required support files
