NI Climbing Frames Tractor and Trailer, Руководство по сборке

Страница: 4 / 19

pg. 4

If the climbing frame is on a level surface then dig 4 holes of diameter 12” and depth 10”. If
the surface is uneven; in this case you would have to compensate for the slope by making
some holes deeper than others.
Step2 : Base Preparation

On your posts, these will not be marked before, due to them being painted.

As you lay them on the ground: there should be a 2x holes on the ground side and on the
outside of the post. The holes which are furthest down the post should be facing outwards

These are then used to brace your horizontal post, and create a H-Frame

From the top of the vertical post to the top of the horizontal post this should be 1265mm.