Step 22:
•
Place each swing hook through the pre-drilled holes of the 3m post that is square on both
ends, secure using the appropriate spanner
Step 23:
•
Now the tricky part. The ‘A’
-frame is designed to be at an 80° angle (i.e it is not at 90 degrees
to the surface). This is best achieved by measuring 11 ft from the end of the climbing frame
to the base of the A-frame
•
The ‘A’
-frame should be then lined up to the centre of the frame
•
The holes on the ground should then be marke
d and the ‘A’
-frame should be sunk into its
place so that the swing bar is level. If your garden is level, holes about 250mm-300mm will
suffice. If your garden is running at a slope, you may need to dig the holes deeper or
shallower depending on which way the ground is falling. The aim is to level the swing bar as
well as th
e 3” x 1.5” support on the A frame
