NHT M7, Инструкция по эксплуатации

Страница: 2 / 4

Thank you for purchasing the NHT M7 loudspeaker. The M7 is a LCR (left main, center channel,
right main) loudspeaker designed for high output sound applications.
Specifications
System Type: 3-way acoustic suspension
Driver Complement:
Woofer: (2) 6.5” laminated cone
Tweeter: 1” aluminum dome
Midrange: 4” paper cone
Crossover: 400 Hz, 12 db/octave, 2.3 KHz, 12 db/octave
Response: 61Hz - 20KHz, +/- 3dB
Sensitivity: 86db (2.83V at 1M)
Recommended Power: 100 Watts
Power Peak: 400 Watts
Power RMS: 250 Watts
Impedance: 6 ohms nominal, 4.2 ohms minimum
Inputs: 1 pair of 5-way binding posts
Weight: 32 lbs.
Dimensions: 8.75"H x 29"W x 10.25"D
Finish: High gloss black
Specifications are subject to change without notice, in accordance with our policy of continuously upgrading the performance of our products.
Placement
The M7 monitor is designed to perform almost identically whether placed horizontally or vertically. Here
are a few guidelines on monitor orientation:
1) You do not need to “toe-in” the monitors toward the listening area; position them facing straight
ahead into the room, perpendicular to the wall in behind the speaker.
2) When oriented vertically, the tweeters should be placed inward as shown below.
3) When using the M7 monitor for a center channel, it should be placed horizontally.
4) When M7 monitors are placed horizontally in a cabinet, the tweeter orientation (top or bottom)
depends on the placement height. If the monitor is placed above the listener's ear, the tweeter
should be below the midrange driver as shown in the photo. If the monitor is placed below the
listener's ear, the tweeter should above the midrange driver.