NH Handling DT300A, Руководство пользователя

Страница: 4 / 8

GB
DT300A / DT300B
WARNINGS -
Safe usage instructions
1. Study, understand and follow all instructions before
operating this jack.
2. Do not exceed rated capacity.
3. Only use the drum trolley for lifting and transporting
standing 200 l drums on hard level surface.
4. Only transport the drum in lowered position.
5. Make sure that the drum cannot drop or swing
during transport.
6. Do not place feet or any other part of the body
under a lifted drum.
7. Never employ the drum trolley in potentially explo
sive atmospheres.
8. Only original accessories and spare parts shall be
used.
9. No alterations shall be made to this jack.
10. Failure to follow these warnings may result in per
-sonal injury and/or property damage.
Assembly:
For safety reasons we recommend to have assistance
for the assembly. First mount cross beam (3) and
wheel brackets (4) on top of legs (2) with matching
screws and washers. Then fix tower (6) and bracket (8,
13)
Lifting: Push the trolley fully against the drum with the
upper arm of the gripping device above the drum. Ac-
tivate the pedal using full strokes. The gripping device
will automatically grip and hold the drum.
Transport: At first lower the drum to lowest position.
Lowering: Slowly turn the release handle (15)
counter clockwise.
Operational temperature - 10° to + 40° C.
Maintenance:
Maintenance and repair must always be carried out by
qualified personnel.
Cleaning: We advice not to use high pressure cleaner,
steam jets or degreasing agents in order to avoid de-
greasing and penetrating water. If not mechanical parts
must be lubricated afterwards.
Daily: Inspect the drum trolley for damages.
Monthly: Lubricate the axle for pedal and other me-
chanical parts with a few drops of oil. Grease the end
of the pump piston.
Oil refill: Correct oil level is up to lower edge of filling
hole with the lever arm fully down. Too much oil causes
poor pumping.
Quantity of oil: 1,2 l.
Any good hydraulic oil of viscosity ISO VG 15 can be
used.
NEVER USE BRAKE FLUID!
Safety Inspection:
According to national legislation – minimum once a
year though – the drum trolley must be inspected by a
professional: functioning of the gripping device, da-
mages, wear and tear, adjustment of the safety valve,
hydraulic unit for leakages. Furthermore that all safety
labels are legible.
Trouble shooting
1. The drum trolley does not lift to maximum height:
verify oil level (see “Maintenance”).
2. Poor pumping (half strokes): there is vacuum in
the reservoir due to too much oil. Verify oil level.
3. Air in the hydraulic system: bleed the system by
pumping the pedal 5 – 10 times with open release
handle.
4. The load is dropping: verify that the release is
closed and that the release spring is properly adju-
sted.
Spare parts:
Replace worn or broken parts with genuine manufac-
turer supplied parts only. All major parts may not be
provided after discontinuation of a model.
Destruction:
Oil must be drained off and legally disposed of.