BlueBoard-LPC1768-H
USER MANUAL
v2.0
20/09/2011
Introduction
The BlueBoard LPC1768-H is header board with LPC1768 from NXP. The LPC1768 is an
ARM Cortex-M3 based microcontroller for embedded applications.
Note: Please note that the BlueBoard-LPC1768-H has undergone a minor hardware change. The
new version is called Blueboard-LPC1768-H V2. V2 version has the been designed keeping in mind
the USB bootloader functionality. User can now use the SW2 for USB bootloading. Whereas in the
earlier version the user had to manually connect a wire on P2.12 to GND while powering ON or
resetting the board, to enter into the USB bootloader mode.
How do I identify the version of my board?
The Blueboard-LPC1768-H V2 boards have been labelled as <Product Number
V2
>
.
Check
the product numbering label at the backside of the board, as shown in the image below. If the board
has no V2 in the label then it is the earlier version of the board (and therefore you cannot USB
bootload using the SW2 button). In following figure the circle indicates the Blueboard-LPC1768-H
V2 board.
http://shop.ngxtechnologies.com
4