UM-BlueBoard Base
Page | 4
Software
•
Firmware for USB bootloader
•
Preloaded program to test the peripherals
Getting started
Before you start working with the board you need to have a few things available.
Requirement
The requirements are divided in two sections.
Hardware
•
The required controller Stamp board
•
Power adapter
–
rating 7.5 V, 1 AMP
•
USB cable
•
VGA cable
•
DB-9 straight Full and Half modem serial cable
•
A headphone / speaker to verify the DAC
•
USB / parallel JTAG
Software
•
Keil MDK-ARM / Rowley CrossWorks tool for cross compiling
•
Flash Magic tool
•
Serial Terminal program
Setup
Hardware
•
Connect the DC power
•
Connect the monitor to VGA connector
•
Connect the headphones to audio connector
•
Connect the serial port 0 to PC
•
Connect USB to PC
•
Insert the required stamp board on to the Base