NGS sixinone, Инструкция по эксплуатации

Страница: 14 / 124

Accessories for cutting beard/moustache hair (accessory D;
Inthree) and hair (Accessory E; Infour) are directly inserted over
the header.
Primary (accessories B and C; Inone) however, for cutting nose,
ear and eyebrow hair cutting (accessory O; Infive) for cutting hair
in the back of the neck and sideburns (accessory A; Insix) and to
use the microshaver (accessory P; Intwo) it shall be necessary to
change headers.
The change of headers is performed in the following steps:
1 Ensure the hair cutter is switched off.
2 Remove the Accucontrol Comb header by pressing and sliding
the cutting length selector in upward direction (fig. 7).
3 Remove the large cutter accessory pressing the release button
(fig 8).
4 Insert the desired header; example accessory for neck of
sideburn as per the case or nose, ear and eyebrow hair cutter.
Instructions
for changing headers