User Manual
11
battery from the original manufacturer or authorized by the original manufacturer. The battery of interior quality
can damage your mobile phone and cause danger!
If the phone is overused at low battery when charging, there might need a longer time for the charge indicator
to be shown on the screen.
Note: please dispose the battery according to the local regulations. Try to recycle the battery as possible. Do not
treat the waste battery as common waste.
Warning: do not throw the battery into fire so as to prevent fire hazard. The broken battery may cause explosion.
Warning
Charging the mobile phone by improper means can cause to explosion. Always refer to the related regulations for
the disposal of the battery.
PIN Code
PIN1 Code
: it is the personal identification number used to enter SIM and able to prevent others using SIM1
without permission. If the mobile phone has activated the PIN1 code protection, when the mobile phone is
switched on, the screen will display ―Input PIN‖. In the process of inputting PIN1 code, the screen will use ―*‖ to
represent the input content. While obtaining SIM, you can obtain its PIN1 code.
PIN2 Code
: it is the personal identification number used for some special functions.
PUK Code
and
PUK2 Code
(8 digits): to change the locked PIN code, you need to use PUK (Personal Unblocking
Key) code. To change the locked PIN2 code, you need to use PUK2 code. If these two codes are not provided
together with the SIM cards, ask the local service provider for them.
Warning: if you input the wrong PIN code for three times continuously, the SIM card will be locked. Please contact
the network operator immediately for help. Attempt to unlock the code may make the SIM card ineffective forever!
General Instructions
Call key
These are the keys used to make a call, on the left front side of the phone keyboard. After typing a phone
number select call key
1
or
2
to make a call, respectively, via SIM1 or SIM2 card. In idle mode, press SIM1/SIM2
call keys to display a list of recent calls (SIM1 and SIM2 support, respectively, 20 voices including incoming
calls, missed calls and dialed calls. Select a contact list and press again SIM1 or SIM2 key to call the number.
Power on/off
In call mode, use this key to end a call; otherwise, use it to leave the current menu and go back to the standby
screen. Press and hold this key for 4~5 seconds to power on or off your phone.
Navigation keys up/down/right/left and OK
In idle mode, press the navigation keys to quickly access some functions; you can assign a function to each key
through
Settings > Phone settings > Dedicated key
. In each single menu, use the navigation keys to move
through the options in the panel, and use the OK/Send key to make a selection or confirm.
QWERTY keypad
The phone features a QWERTY keypad, with the same layout as computer keyboards.
Содержание Vanity EVO
Страница 1: ...User Manual...
