nfortec VANTH 650W, Быстрый старт

Страница: 3 / 16

3
650W / 750W / 850W 80+ GOLD
Power Supply User Manual
EN
V A N T H
Safety Information
Over-voltage protection (OVP)
Over-voltage protection for the 12V, 5V and 3.3V DC outputs is required to comply with the ATX specification. OVP shuts down the PSU in the event
that the DC outputs exceed a set level, determined by the PSU manufacturer. The minimum voltage levels required for compliance are 13.4V for the
+12V rail(s), 5.74V for the +5V rail and 3.76V for the 3.3V rail.
Short-circuit protection (SCP)
A short-circuit is defined as any output impedance of less than 0.1 ohms. Amongst other things, SCP ensures that the PSU shuts down should the 3.3V,
5V and 12V rails short to any other rail, or to ground. It also ensures that no damage should occur to the unit, or your PC’s components in the event
of a short.
Under Voltage Protection (UVP)
Under-voltage protection for the 12V, 5V and 3.3V DC outputs. UVP shuts down the PSU in the event that the DC outputs exceed a set level,
determined by the PSU manufacturer.
Over Power Protection (OPP)
The over-power protection (OPP) kicks in when the power we pull from a PSU exceeds its maximum rated capacity. Usually, the manufacturers give
a little room for overpowering the PSU, so the OPP threshold is set to 50 to 100W (in some cases even more) above the maximum rated wattage of
the PSU. In 12V rail PSUs, where OCP is meaningless in most cases, OPP takes over its role and shuts down the PSU in case the +12V rail is
overloaded.
Over current protection (OCP)
is an electronic overload protection circuit that is often specified in data sheets as OCP (= Overcurrent Protection) .The power supply as well as the
connected loads are electronically protected against overload by limiting the output current to a maximum value. OCP is a feature that uses one or
more circuits to prevent a power supply from delivering more current than its circuits and cables can handle.
Over temperature protection (OTP)
Continuous high temperatures are undesirable and can lead to malfunctioning or more damage to the supply, connected circuits or downstream
equipment. The over temperature protection (OTP) therefore ensures that the supply operates within the safe design temperature and shuts the
supply down whenever this is exceeded.
WARNING: This unit unit has no user-serviceable parts inside. Opening the casing presents a risk of electrocution and will
void the product’s warranty. NFORTEC will not be responsible for any result of improper use, including but not limited to, any
use of the product outside of its intended purpose or use inconsistent with the warranty terms available online. (Warranty
information is available at https://www.nfortec.com/garantias and this manual is avaliable at https://www.nfortec.com/
soporte)