CARE AND MAINTENANCE
Automatic
Defrost
•
Any ice build-up on the inner back wall during operation will automatically defrost
during a compressor off cycle.
•
When defrosting is in process, the circulation fans for both zones will continue to run.
•
Water from the defrost operation will drain into the drip tray (on the compressor)
and the water will evaporate with the help of the compressor.
Cleaning Your Appliance
•
Upon installation of your new appliance, it is recommended that it be cleaned
thoroughly.
•
Unplug the unit from the wall outlet.
•
Remove all contents.
•
Wash the inside with a damp warm cloth soaked in lukewarm water and baking soda
solution. The solution should be about 2 tablespoons of baking soda to a quart of
water.
•
Be sure to keep the door gasket (seal) clean to keep the unit running efficiently.
•
The outside of the appliance should be cleaned with mild detergent and warm water.
•
Dry the interior and exterior with a soft cloth.
•
Dust or anything else blocking the vent may hinder the cooling efficiency of the
appliance. Vacuum the vent if necessary.
Vacation Time
•
Unplug the unit from the wall outlet.
•
Remove all the contents.
•
Clean the appliance.
•
Leave the door open slightly to avoid possible formation of condensation, mold, or
odors.
•
Short vacations: Leave the appliance operating during vacations of less than three
weeks.
•
Long vacations: If the appliance will not be used for several months, remove all
bottles and unplug the power cord. Clean and dry the interior thoroughly. To
prevent odor and mold growth, leave the door open slightly, blocking it open if
necessary.
Moving Your Appliance
•
Unplug the unit from the wall outlet.
•
Remove all bottles.
•
Securely tape down all loose items inside your appliance.
•
Tape the doors shut.
Energy Saving Tips
•
The appliance should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of the way of direct sunlight.
•
Ensure that door is closed when the appliance is plugged in.
12
