7
POWER SOURCE
Place the unit on a flat stable surface and connect the unit’s power cord to any convenient
AC 120V - 60 Hz household outlet.
BATTERY BACKUP
The clock and alarm settings can be protected against power failure with batteries for a short
period of time. If no backup batteries are installed or the power failure is prolonged, you will need
to set the clock and alarm settings again.
1. Open the battery cover.
2. Insert 2 “AA” batteries (not included) into the battery compartment, making sure that the
proper polarities (“+”and“-”) are maintained.
To prevent possible damage to this unit:
• Load new batteries with their polarities (“+” and“-”) aligned correctly.
• Do not apply heat to batteries, or internal short circuit may occur.
• If this unit is not to be used for a long period of time, remove all batteries and store them in a
cool and dry place.
• Remove used batteries immediately and dispose of them.
• Do not use old and new batteries together. Also never use different types of batteries.
• Never try to take batteries appart, put batteries under the direct sunlight, or throw them into fire
or place them on a heater. Results could cause harm.
