Clock Alarms
SETTING THE WEEKDAY (W) AND SINGLE DAY (S)
ALARMS
• Press the
ALARM
button
once
to enter the alarm setting
mode. The default alarm is a Weekday alarm (
W
). The
abbreviation
“OFF”
with a letter
“W”
next to it will be
displayed, if the alarm has not been previously set.
• Press and hold the
ALARM
button for two seconds.
The hour digit will flash.
• Adjust the hour using
UP
( ) or
DOWN
( ) buttons.
• Press the
ALARM
button again. The minute digits will flash.
• Adjust the minutes using
UP
( ) or
DOWN
( ) buttons.
• Press the
ALARM
button again to confirm and the weekday
alarm time will be set.
• Set
Single
(
S
) day alarm if desired in the same manner.
SETTING THE ICE WARNING ALARM (PRE-AL)
If
Weekday
(
W
) or
Single
day (
S
) alarm is set, the
Ice Warning
(
PRE-AL
) alarm can be programmed.
• Press the
ALARM
button
once
to enter into the Ice Warning
alarm setting mode. The abbreviation
“OFF”
with a
“PRE-AL”
next to it will be displayed.
• Press and hold the
ALARM
button for
two seconds
. The
number
30
will flash, which indicates that if selected, the alarm
will sound 30 minutes earlier than the Weekday or Single
alarm.
• Select the desired Ice Warning alarm interval in 15 minutes
increments between 15 and 90 minutes, using the
UP
( ) or
DOWN
( ) buttons.
• Press
ALARM
button to confirm and exit from the alarm
setting mode.
ACTIVATING THE ALARM
• Press the
ALARM
button
once
to enter the desired alarm
mode.
• Press
UP
( ) to activate or
DOWN
( ) to deactivate desired
alarm. When alarms are activated, the corresponding icons
W, S
or
PRE-AL
will be displayed.
15
