manualshive.com logo in svg

NexxTech 49110000, Руководство пользователя, Страница: 18 / 46

Поделиться
Скачать
NexxTech 49110000 Скачать руководство пользователя страница 18

 

 

18

Installing the Motion Detector

•  Attach the Motion Detector to a wall at a height of 5 to 6 ft. using the mounting bracket 

and screws provided.

•  Point the Motion Detector so that it looks slightly downwards.
•  Set the slide switch (on the back) to position 1 for instant triggering for maximum 

sensitivity or position 2 to trigger only after two movements have been sensed.

Testing the Motion Detector

•  Set the slide switch on the Motion Detector to position 1.
•  Press and hold the TEST button for about a second (until 

the LED flashes twice) and then release it.

•  Wait 20 seconds for the Motion Detector to settle.
•  Walk in front of the Motion Detector. The indicator LED 

lights each time it senses movement. Check the coverage 

area and reposition the sensor as required.

•  Press the TEST button to return to normal operating 

mode.

 

Note:

 The Motion Detector will automatically return to 

normal operating mode after approximately 2 minutes.

Tamper switch      

(under battery compartment lid)

tf

6

-

5

tf

0

4

-

0

3

˚

0

9

Installation

Содержание 49110000















































Отзывы:

Нет отзывов