5
PREPARATION
CONNECTING POWER
Using AC Power
You can power your telephone cas-
sette recorder from AC power using
an optional AC adapter.
Caution:
You must use a 120V AC/6V
DC adapter that delivers at least 300
milliamps. Its center tip must be set to
negative, and its plug must properly fit
the recorder’s
DC 6V
jack. The recom-
mended adapter meets these require-
ments. Using an adapter that does not
meet these requirements could dam-
age the telephone cassette recorder
or the adapter.
Follow these steps to connect your
telephone cassette recorder to AC
power.
1. Set the AC adapter’s voltage
switch to 6V.
2. Insert the 5.5 mm outer diameter/
2.1 mm inner diameter barrel plug
into the adapter’s cord to read
TIP –.
3. Insert the plug into the telephone
cassette recorder’s
DC 6V
jack.
4. Plug the adapter into a standard
AC outlet.
Using Battery Power
Your telephone cassette recorder can
use four AA batteries (not supplied)
for power. For the best performance
and longest life, we recommend alka-
line batteries.
Follow these steps to install batteries.
1. Press the battery compartment
cover’s tab and lift off the cover.
2. Insert the batteries into the com-
partment, as indicated by the
polarity symbols (+ and –) marked
inside the compartment.
3. Replace the cover.
Caution:
Do not mix old and new bat-
teries, different types of batteries
(standard, alkaline, or rechargeable),
or rechargeable batteries of different
capacities.
Replace the batteries when the re-
cording indicator dims.
