Nexxt Solutions - IP Camera Centralization Management Software
15
3.1. IPC Monitor Interface
3. Device management
3.2. Device List interface
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Status panel:
shows the number of cameras added to the device.
Views:
full screen, Quad view and Multi-split screen.
On Screen display:
shows the date and time on the video.
Play and Stop buttons.
Audio on/off, Mic, Record.
Pan, tilt and zoom control buttons.
Alarm input on/off (if applicable).
Device settings:
this tree provides a visual representation of all detected devices. It supports a
multi-level structure from which users can connect or disconnect devices in a particular group.
Users can double click on a device to connect it and see the video in the display area, or click
the camera.
PTZ control
: direction buttons for controlling the Pan, Tilt and Zoom of the camera. This only
applies to the PTZ camera models.
Group management:
set groups of cameras to be displayed in a cycle.
Schedule record:
users can appoint a certain period in which the client will start recording.
Alarm settings:
the Client software supports various kinds of alarm triggers, alarm events,
and can be used to set an alarm schedule.
Full screen:
this view is enabled by right clicking on a channel; double clicking on it also
enlarges the view and returns it to the original size.
Dragging and dropping a channel:
click and hold a channel to drag and drop it to another
channel. If the target channel is used, the two video channels will be swapped.
Stop:
right click on a channel to stop the video or to view it in full screen.
After installing the client software, we need to add the devices. When running the program, the
device list of the main interface is empty, as shown below:
Device list interface
