Semi-knocked down
hinged wall-mount enclosure
PCRWESKD06U55BKPCRWESKD09U55BK
PCRWESKD12U55BKPCRWESKD15U55BKPCRWESKD18U55BK
Models:
Страница 1: ...Semi knocked down hinged wall mount enclosure PCRWESKD06U55BK PCRWESKD09U55BK PCRWESKD12U55BK PCRWESKD15U55BK PCRWESKD18U55BK Models ...
Страница 2: ...tip 5mm allen tip Hex to square socket adaptor 2 5mm allen key 3 13mm hex socket 4 Pair of gloves 5 Long nose plier 6 Cleaning towel 7 3mx2m mat or padded surface For support and to find out more about our complete solution we invite you to visit us at nexxtsolutions com Front tempered glass door Rear door Top panel Bottom panel base Front frame Rear frame Perforated mounting rail Removable side p...
Страница 3: ...rame 1 rear support frame Identify the side bars Position the side bars between the front and rear support frames by aligning the 4 extruded holes and tabs with the openings and rails on the bottom panel Make sure to position the bars so that the curved section faces up and outward and the smooth side with the square holes faces inward Insert the M8xL12 allen head screws from the outside through t...
Страница 4: ...in the enclosure 1 door pivot pin 2 flat metal washers Identify the front cam lock and key set Start by unfastening the screw located on the back end of the lock Take apart the metal washer lock offset plate and nut The white plastic washer around the lock is the only part that remains assembled Proceed to insert the cam lock with the plastic washer into the door opening from the outside When doin...
