Nexxt Solutions - Integrated Wireless IP Camera
6
Begin by screwing the bracket to the camera.
Connect the camera using the power adaptor that
comes with the product.
Using a standard Ethernet network cable, connect
the camera to your network.
The camera can either be connected to a router/
switch or directly to a PC with an Ethernet
network cable. We recommend setting up the
camera on your network using a wired connection
prior to using the device in a wireless
configuration.
Continue with the setup of the camera (as
described in the following chapter). Once the
camera has been successfully connected to your
network, it can be mounted on the wall or ceiling
using the wall plugs and screws included with the
device. (The initial set up must be performed
using Windows operating system only).
1. Plug the cable into the RJ-45 connector on the
rear of the camera..
1.
2.
3.
INTERNET
Cellular
Phone
IP Camera
Modem
PDA
Computer
Intranet
Internet connection
