LED indicator status
When the red light is on for 3 seconds
1. Power on the remote control
2. Press and hold the Bluetooth button for 3 seconds to clear the pairing information
3. The remote control is paired and connected
Connection with N110
The powered on remote control will be automatically paired with the NexBar N110.If it is not
paired successfully, please short press the Bluetooth button of NexBar N110 and remote control
to pair and connect again.
If the remote control is paired, you can press the Bluetooth button for 3 seconds to delete the
pairing information. After deleting the pairing information,the remote can be paired with the new
N110 again.
The remote control is paired but not connected to the N110. After 5 seconds, it enters the
sleep state. Please press any key to wake up the remote control and reconnect it.
The remote control can only be paired and connected by one N110
