General Description
The Nexus Standard MP V3 is an Analogue Induction Balance
(IB) metal detector that operates in the very low frequency (VLF)
range and it is designed for use on all Inland Sites, Tidal Salt
Water Beaches. The Nexus Standard MP benefits from our new
Super Damping Technology that gives it the ability to effectively
suppress by means of proper balance any kind of mineral
material that exists on the ground surface.
MP stands for Mineral Power. The Nexus Standard MP V3 may
be the most efficient IB metal detector for use in heavy mineral
ground conditions and strong magnetite. In this regard the MP V3
is the best IB based metal detector from the Nexus product line.
It may be used in any of the two basic modes of operation -
All-Metal or VCO Multi tones.
It is designed to be an All-purpose metal detector, capable of
finding both small and large targets at extreme depths in normal
soil conditions. It is also designed to work with very high
efficiency in all existing types of mineral soils and magnetite
(black sand) surpassing in performance all other IB metal
detectors. To obtain the best results, as with all metal detectors, it
is essential to understand the settings and operation of the
detector. Professional users can enjoy the benefits of the deep
seeking Nexus technology.
As a general rule, the best results will always be obtained when
the detector is properly set in All Metal Mode. Therefore users will
need to practise and experiment in order to obtain the best
possible results on any particular site. All sites and soils are
different and settings that will give good results on one site may
be less successful if used elsewhere.
The Nexus Standard MP is designed to detect the very deepest of
targets and operates near to the limits of what is achievable with
induction balance.
1.