Nexus OSL103, Инструкция по эксплуатации, Страница: 2 / 9

Connecting to a panel or desk
Rout or cut a hole measuring 106 (w) x 58 (h) mm
(5mm corner radii) in to your panel/desk.
Push the OSL103 through the hole from the front
and hold in position. Push the retaining collar on to
the rear of the product until it fits securely in place
Connecting to the power supply
Push the GST connector from the OSL103 in to a
NEX1003xx Starter Lead (fig. 1) or NEX3001 Power
Module (fig. 2) until the clip engages and you hear a
“click”.
continued...
“click”
fig. 1