Nexus NX Start Pack 2, Инструкция по установке и эксплуатации

Страница: 39 / 48

English Start pack 4
38
14.2 Wind Settings, C50
To return to normal PAGE, press SET when the text C50 [rET]
is displayed.
C51 not used!
14.2.1 Unit for Wind speed, C52
Unit for Wind speed [KTS] for (KnoTS), [M/S] for (Metres/S) and
[BF]
for (Beaufort).
14.2.2 Wind speed calibration, C53
This setting is for calibration of wind speed. For a standard Twin-
Fin transducer, the value should be 1.70. For Mono-Fin
transducers, the calibration value should be 1.50
14.2.3 Adjustment of Wind angle, C54
Mast top unit misalignment adjust value or the so called ”A-
fault”, makes it possible to adjust any horizontal angle.
Example: If the Wind angle is +4° when you sail/drive the boat
straight into the Wind, set the calibration value in C54 to 356°.
14.2.4 Calibration for the Wind transducer, C55-C62
Note, this setting only apply to non Wireless transducers.
Wireless transducers are calibrated and the values are
stored in the wind transducer.
In channels C55 to C62 you set the calibration values for the
mast top unit. Each mast top unit is individually calibrated for
best accuracy. See the separate Wind calibration certificate
supplied with each mast top unit. Each of the inter-cardinal
directions are calibrated.
C55 000 000°
C56 045 045°
C57 090 090°
Set the calibration value according
C58 135 135° to the provided calibration certificate
C59 180 180°
C60 225 225°
C61 270 270°
C62 315 315°