Nexus NX Compass, Инструкция по установке и эксплуатации

Страница: 18 / 26

NX Compass Pack English
17
6.2 Select damping for BSP, VMG, TWD or STR
Go to the function you want to change the damping for. Press SET and MINUS
together. The current damping is displayed. Change with PLUS or MINUS and confirm
with SET .
6.1 Select unit for BSP and VMG
Go to the BSP or VMG function and press SET and MINUS together. Press PAGE and
the current unit is displayed. Select new unit with PLUS or MINUS and confirm with
SET .
Note, BSP and VMG will always use the same unit.
6.2 Calibrate the compass sensor.
In order to get the reading from the compass sensor correct, it has to be calibrated.
To enter the calibration mode, press SET for more than 2sec.
1. Set the mounting orientation of the compass sensor.
Press SET for more that 2 sec. Press PAGE one time and the text SET rEF is
displayed. Make sure the boat is levelled and press SET . The system will now
automatically detect if the compass is mounted horizontally or vertically.
2.
Automatic deviation of the compass
Press SET for more that 2 sec. Press PAGE two times and the text DEV Aut is
displayed. Start turning the boat in a smooth turn in calm weather (making
sure you have room to make a comfortable 400 deg turn. Press
SET and the
display will start to count down from 400. When you have reached zero, press
SET . Go back to normal display mode with a long press on SET .