12
13
How to Use
1. POWER UP YOUR IONIZER.
- Depress the black power button located on the back of the ionizer to the
"ON" position.
- The black power button is ALWAYS left on. Your ionizer will "go to sleep" in
between uses and "wake up" when it detects water flow again.
- You will hear a single chime and the display panel will illuminate for 2-3 seconds.
- With the power on and the display panel dark, your ionizer is now in standby mode.
2. START WATER FLOW THROUGH YOUR IONIZER
A. Set the flow control Valve - This control is on the front of machine
and has an "ON" and "OFF" position. Try initially setting this half way
between "ON' and "OFF".
Important : This is one of the most critical features in controlling your
ionizer's performance.
This control WILL DIRECTLY impact the performance of your ionizer.
A slow flow will yield higher pH; a fast flow will yield lower pH.
B. Turn on your water faucet. Turn the lever to until you "divert" the water through your ionizer.
C. Get the feel for the difference in flow rates by adjusting FLOW CONTROL VALVE from a slow
trickle to the fastest flow. When you begin ionizing the water, start with it in the medium range
and adjust faster or slower as necessary to achieve optimum results.
3. TO SELECT ALKALINE WATER
A. Start Water Flow through your ionizer.
Remember -
The New ionizer cleans every times use.
But when the ionizer is operated within 1 minute, have no cleaning.
B. To select an alkaline level simply depress the "ALKALINE" button to move to next
level until the desired level is achieved. The pH level indicator will change accordingly.
C. Note: Your ionizer will always "remember" the last setting. For instance, if the previous
setting was Alkaline Level Medium, then it will go back to Medium when you start the
ionizer.
IMPORTANT NOTES:
-If you have never consumed alkaline water - do not use a setting higher than
LOW to begin with. Let your body adjust slowly and naturally for 4-7 days.
After this initial adjustment period, you may gradually increase the alkalinity of the water.
-pH levels will vary according to the minerals present in the source water and water
flow rate through your ionizer.
4. TO SELECT ACIDIC WATER
Note: Acidic water is for external use only.
DO NOT DRINK.
1. With water running through the ionizer:
2. Depress the "ACIDIC" button. The Acidic Water Indicator will light and the pH Level
Indicator will move up and down the scale to indicate the selected level.
3. To select a different level, depress the "ACIDIC" button to move to next level until
the desired setting level is achieved. The orange symbol and number
will change accordingly.