4
IN-CABINET SUBWOOFER PERFORMANCE
The
CI-HC8, HC10
and
HC12
, our 8″, 10″ and 12″ Hidden within
Cabinet (“HC”) subwoofer systems, offer the highest level of per
-
formance when the installation environment requires position-
ing the subwoofer inside a concealed cabinet. The proprietary
downward-firing bandpass design delivers ultra-clean bass fre
-
quencies with higher SPL’s by concentrating the output through
a vented slot located in the side of the enclosure.
IN-CABINET SUBWOOFER INSTALLATION
Place the in-cabinet subwoofer into the cabinet so that the
slotted port fires out either a toe-kick or the intended opening
(preferably unobstructed). Use the provided gasket tape to
decouple the subwoofer from whatever material it may come in
contact with during installation.
CONTENTS:
• In-Cabinet Subwoofer
• Power Cord
• Rubber Feet (4)
• Product Manual
ADDITIONAL INFORMATION
• Wall Outlet: In the US 110V – 20-amp service preferred as
12-gauge wire, used for 20-amp service, provides a better draw
supply to the amplifier. There is a slight improvement in tight
-
ness and bass speed going from 16 amp to 20 amp
• Rubber feet are included to provide isolation between bottom
of sub and floor. This isolation is necessary for clean bass
• Subwoofer response is complex and room interactive. In addi-
tion, there is a break in period of about 2 weeks to attain best
performance
