Make sure the Cel-Fi COMPASS is connected to the
donor antenna using the SMA to N adaptor.
Set the antenna to a position on the mount then press
the corresponding number in the app. Wait for the app
to gather data to move the antenna to next position.
SETUP MODE
1)
Connect Cel-Fi COMPASS to the LAN using an
ethernet cable.
2)
In Cel-Fi WAVE PRO, select “Internet” then select
“Download Software”. The app will check for
updates in the cloud. An exclamation mark “!” will
appear if there are software updates available.
Follow the instructions on the screen of your
phone to download the file to Cel-Fi COMPASS.
There are two modes to this feature depending on what Cel-Fi COMPASS is connected to:
INSTALL MODE
1)
Connect Cel-Fi COMPASS to a Cel-Fi QUATRA Network Unit.
2)
Select “Cel-Fi QUATRA” or “Cel-Fi QUATRA (Fixed IP)” if a fixed
IP has been setup already.
3)
From the main menu select “Software Update”, the app will
display a table with the NUs and CUs attached and the current
software versions. Press “Install Now” to start the software
upgrade.
This feature is designed to work with the Cel-Fi Mount.
Software Update
Antenna Pointing Algorithm
NOTE: Once the app has two or more
data points, the app will recommend
the strongest signal band.
Antenna Positioning
<
Rotate your antenna to a position on the dial
mount and tap the corresponding number
button. You will need to test 2 or more
positions to see the results. Learn more.
?
