Nextiva V3320RD Скачать руководство пользователя страница 2

Страница: 2 / 4

Installation

CAUTION:

Verint will not be held liable for damages to persons or properties due to the improper installation

of the Nextiva V3320RD IP camera.

1. Attach the supplied template sticker to the ceiling.
2. Cut a round hole with a diameter of Ø84mm in the ceiling.

3. Connect the network cable to the network port.

4. Pull up the three brackets, and insert the camera into the hole. The brackets will automatically attach to

the ceiling.

NOTE:

The thickness of the mounting surface should not be greater than 36mm (1.02 in).

5. Adjust the viewing angle.

Содержание V3320RD

Страница 1: ...ct is intended for indoor use and to be supplied by a UL listed power supply marked Class 2 or IEEE 802 3af compliant Product Dimensions 1 97mm 3 82 in 2 49 mm 1 93 in 3 11 2 mm 0 44 in 4 35 2 mm 1 39...

Страница 2: ...plied template sticker to the ceiling 2 Cut a round hole with a diameter of 84mm in the ceiling 3 Connect the network cable to the network port 4 Pull up the three brackets and insert the camera into...

Страница 3: ...octets of the MAC Address Username and Password admin From a web browser From the rear of the device 1 Type the IP address of the Nextiva IP camera in the Address bar and then press ENTER 2 Type the u...

Страница 4: ...er to Technical Note TN529 Integrating Nextiva IP Cameras with EdgeVR To add to an EdgeVR 1 Open the Auto Config Cameras page From Vid Center click Setup DVRs in the Task Center pane and then double c...